Missing Points when using Shaded Circle or Multiple Symbols

[CH2405]

I am using Mappoint 2006 and have linked the data in a spreadsheet to mark
points on a map showing different categories of office. There are about 45
points. One group has 25 locations, another has 10, the rest are split
between 5 other categories.

When I use the data mapping wizard only about 30 of the locations are marked
when I use the shaded circle or multiple symbol options - the same one in
each case I think. However if I use the simple pushpin marker and don't split
into categories, all the locations are marked, so the addresses must be OK.
There is no obvious link between those shown and those not - most groups have
at least one point marked, but one or more not marked.

Any ideas what I might be doing wrong ?

[Derek Chan]

Hi,

Please post Mappoint CD related issues here
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.mappoint&lang=en&cr=US

Regards,
--
Infusion Development
http://www.infusion.com

Post by CH2405
I am using Mappoint 2006 and have linked the data in a spreadsheet to mark
points on a map showing different categories of office. There are about 45
points. One group has 25 locations, another has 10, the rest are split
between 5 other categories.
When I use the data mapping wizard only about 30 of the locations are marked
when I use the shaded circle or multiple symbol options - the same one in
each case I think. However if I use the simple pushpin marker and don't split
into categories, all the locations are marked, so the addresses must be OK.
There is no obvious link between those shown and those not - most groups have
at least one point marked, but one or more not marked.
Any ideas what I might be doing wrong ?
--
CH